We are still developing the Gauntl33t. However, I figured maybe we could go ahead and sell a parts kit for the Gauntl33t for those who are comfortable with DIY to play around with.

The idea is we would send parts to build a single or pair wrist mounted or backpack version of the Gauntl33t using the simple Gauntl33t backplane.  Included would be the general hardware and electronics along with resin printed parts. The FDM parts will need to be printed by each person who purchases the kit.

The glove would use parts similar to the image above but use our smaller voltage regulator and the glove part from this video:

https://www.tiktok.com/t/ZTSny2oTE/

It will not be the board from this video though.  The simple board will keep it more user friendly for repair.

The backpack version is still being figured out but has been proven in concept. Instead of using fishing line fine steel cables will be used through the majority of the dropper housing bowden tube for less friction to allow for the electronics to be mounted on a users back and reduce the weight on the hand to a minimum.  The user could then mount their own tracking solution to the back of the hand part.

 We will ship in 7 months (February 2027) to allow for more orders to hopefully purchase parts in bulk.  More details to be posted over time.

In the meantime checkout more details on the project here:

https://github.com/Haptic-Solutions/Gauntl33tBackplaneSimple

Please keep in mind this is very DIY so if you are looking for something polished please wait for a final version. Think of this more like an older 3D printer that is more like a project you have to maintain.